14
The Observer USB reads in Total Counts, CPM, CPS, µR/hr, mR/hr, µSv/hr and has the ability to collect, log the
data received, calibrate the unit, and echo the readings collected on a PC. The data is displayed on a graph as
well as a digital on-screen meter and can be saved or printed in various ways, including a spreadsheet format.
USB.
Connect to The Inspector
mini-B type jack located on the side of the Inspector above the Output Figure 2 (9). To connect the Inspector,
power on your detector, plug the cable into the USB jack, and connect the other end to the USB port on your
connected.
Preferences
measurement can be adjusted in View > Preferences
menu.
Feture
date in your collected data. If you exceed that amount
menu, the internal clock of the Inspector can be set
the recording feature is on.
feature.
Comments to this Manuals